Telegram RegisterThe public register of Telegram
Telegram profile photo for Welding Fabrication World

Channel

Welding Fabrication World

@weldfabworld

On this record: Growth · Engagement · Reactions · Posts · Cite this entry

3,214subscribers

+15 since we began measuring on 8 August 2026

Risers and fallers across the register · movement among entries of 3,162–10,000.

Register entry

Telegram ID-1001535720989
TypeChannel
Username@weldfabworld
CreatedBetween 1 August 2021 and 28 February 2023— estimated from Telegram’s id allocation, not measured. How this range is calculated.
First recorded8 August 2026
Last confirmed live27 August 2026
Measurements held7
Confirmed unchanged1 time, most recently 27 August 2026
On Telegramt.me/weldfabworld

Growth

3,1993,2143,206.58 August 2026 — 3,199 subscribers8 August 2026 — 3,199 subscribers11 August 2026 — 3,200 subscribers14 August 2026 — 3,203 subscribers17 August 2026 — 3,210 subscribers20 August 2026 — 3,204 subscribers27 August 2026 — 3,214 subscribers8 August 202627 August 2026
7 measurements spanning 19 days, net +15. Dots are measurements; the straight line between them is drawn to join them, not to claim we know the path taken in between — snapshots are recorded only when a count changes, so gaps mean “no change observed”, never “interpolated”. The vertical axis spans 3,197–3,216 and does not start at zero.
Measurement log — every subscribers count we have recorded
Measured (UTC)SubscribersChange
27 Aug 2026, 10:123,214+10
20 Aug 2026, 19:243,204-6
17 Aug 2026, 23:083,210+7
14 Aug 2026, 21:173,203+3
11 Aug 2026, 14:423,200+1
8 Aug 2026, 11:273,199no change
8 Aug 2026, 00:153,199first reading

Engagement

20 posts held, back to 28 July 2026the reader has not yet reached the start of this channel’s public history, so older posts may sit further back, unread. Read across 1 pageof Telegram’s post history, 20 posts per page.

ERR · 30 days
8.75%
avg views ÷ 3,214 subscribers
Avg views / post
281
19 posts measured
Reaction rate
0.559%
reactions ÷ views · ER floor
Posts in window
19
of 20 held

ERR is average views per post over the last 30 days divided by subscribers, the definition TGStat uses, so this figure is comparable with the one you will see elsewhere. It falls structurally as a channel grows: a high ERR on a small channel and a low one on a large channel describe reach mathematics, not quality. We publish the figure and the sample it came from and pass no verdict on it.

ER is defined industry-wide as (forwards + reactions + comments) ÷ views— note the denominator is views, not subscribers. Telegram’s public web preview carries views and reactions but not forward or comment counts, so the reaction rate above is the reactions term only and is therefore a floor: the true ER for this channel is higher by an amount we have not measured and will not estimate. It is computed over the 17 of 19 measured posts that carry a reaction reading, and over those same posts' views.

What these figures were computed from
WindowRolling 30 days · latest post in window 7 August 2026
Posts held20 (28 July 20267 August 2026)
Views total5,342
Reactions total28
Forwards / commentsnot exposed by the public surface — not measured, not estimated
Readings taken8 Aug 2026, 00:15 UTC

Views are a single reading per post, taken at the time above. A post published in the last day or two is still accumulating views, which pulls the 30-day average down slightly. That is a property of the standard definition rather than a fault in it, so we keep the definition rather than “correcting” the number into something nobody can reproduce.

Precision. Telegram publishes view counts on its public widget in short form — 8.12K, 3.7M — so any reading at or above 1,000 reaches us rounded to three significant figures, and only counts below 1,000 are exact. Averages and rates derived from them are shown to the same precision rather than to the unit: a figure like 3,701,250 would assert digits nobody measured.

Reaction counts are published per emoji and rounded the same way, so a total below 1,000 is exact and a larger one is a sum that may carry a rounded component from each emoji above 1,000. Because it is a sum, it does not look rounded — read a large reaction total as three significant figures per contributing emoji rather than as the figure it prints.

Reaction mix

29 reactions across 17 posts, in 3 distinct kinds. The most used accounts for 89.7% of them.

Every reaction kind recorded on the sample, most used first
ReactionCountShareShare, drawn
2689.7%
❤‍🔥26.90%
👍13.45%

No sentiment is inferred, and none should be read in. This table is ordered by count and by nothing else. Emoji do not carry stable meaning across languages or communities — 🙏 is thanks in one channel and mourning in another — so we publish which ones were pressed and how often, and pass no judgement on what an audience meant by them.

Precision. Telegram publishes reaction counts per emoji and short-forms each one — 4.34K, 1.2M — so any single kind at or above 1,000 reaches us at three significant figures, and only counts below 1,000 are exact. The shares above are ratios of those figures and carry the same error. This is also why the total here can differ slightly from a reaction total printed elsewhere on the page: both are sums of the same rounded parts, taken over samples with different edges.

Coverage. Reactions were read on 18 of the 20 sampled posts in this sample. Summed by Telegram’s own count on each post — not by adding up the per-emoji breakdown above — those same posts carry 29reactions in total: the kind of figure the paragraph above means by “a reaction total printed elsewhere on the page”.

Measured over the 20 most recent posts we hold, published 28 July 2026 to 7 August 2026, using the newest reading held for each. Telegram Stars are excluded: they are a payment, not a reaction, and they have their own section.

Recent posts

7 Aug 2026, 12:24 UTC102 viewsread 8 August 2026
Photo

WELDING DEFECTS – A COMPLETE GUIDE FOR WELDING ENGINEERS & INSPECTORS 🔗 https://www.weldfabworld.com/ Welding defects can significantly reduce the strength, quality, and reliability of a welded joint if they are not identified and controlled. Understanding common defects such as porosity, cracks, undercut, overlap, lack of fusion, lack of penetration, slag inclusion, spatter, burn-through, and distortion is essential

5 Aug 2026, 14:24 UTC235 viewsread 8 August 2026
Photo

STANDARD vs SPECIFICATION vs RECOMMENDED PRACTICE (RP) 🔗 https://www.weldfabworld.com/ Standards, Specifications, and Recommended Practices are often used interchangeably—but they serve different purposes in engineering. A Standard defines what should be done, a Specification defines what must be done for a specific project, and a Recommended Practice (RP) provides proven guidance on how it can best be done based o

5 Aug 2026, 09:45 UTC231 views1 reactionsread 8 August 2026
Photo

WET H₂S DAMAGE MECHANISM – THE SILENT THREAT IN REFINERY SYSTEMS 🔗 https://www.weldfabworld.com/ Wet H₂S environments can generate atomic hydrogen that diffuses into steel, leading to serious damage mechanisms such as Hydrogen Blistering, Hydrogen-Induced Cracking (HIC), Stress-Oriented Hydrogen-Induced Cracking (SOHIC), and Sulfide Stress Cracking (SSC). Understanding how these mechanisms develop, along with proper

1

4 Aug 2026, 14:20 UTC251 views1 reactionsread 8 August 2026
Photo

PITTING CORROSION 🔗 https://www.weldfabworld.com/pitting-corrosion/ Pitting corrosion is one of the most dangerous forms of corrosion because it starts as tiny, almost invisible pits but can quickly penetrate deep into the metal, leading to unexpected failures. Learn how pitting forms, why stainless steel is still vulnerable, the role of chlorides, oxygen, PREN, and the best prevention methods to protect critical e

1

4 Aug 2026, 10:36 UTC232 views3 reactionsread 8 August 2026
Photo

WELD PROFILE CHECKING https://www.weldfabworld.com/weld-profile-checking/ A strong weld isn't just about appearance—it's about meeting code requirements, ensuring structural integrity, and preventing premature failures. Learn how to inspect weld size, reinforcement, undercut, overlap, root concavity, and other critical weld profile features using the right inspection tools and best practices. ✅ Understand acceptable

3

4 Aug 2026, 06:31 UTC227 views2 reactionsread 8 August 2026
Photo

Pitting Corrosion – Small Pit, Big Problem 📖 Read the complete article: https://www.weldfabworld.com/pitting-corrosion/ Pitting corrosion is one of the most dangerous forms of localized corrosion because it creates tiny surface pits that can penetrate deep into the metal while remaining almost invisible. Even with minimal overall material loss, it can lead to leakage, equipment failure, and costly shutdowns. In th

2

3 Aug 2026, 05:31 UTC256 views1 reactionsread 8 August 2026
Photo

🔗 Read the complete LRUT guide: https://www.weldfabworld.com/long-range-ultrasonic-testing/ 🔍 What defects can Ultrasonic Testing (UT) detect? Ultrasonic Testing (UT) is one of the most powerful Non-Destructive Testing (NDT) methods for detecting internal discontinuities without damaging the component. From cracks and lack of fusion to porosity, slag inclusions, and laminations, UT helps ensure weld integrity and str

1

3 Aug 2026, 03:45 UTC273 views1 reactionsread 8 August 2026
Photo

🔥 Monel vs Inconel – Which Alloy Should You Choose? Both are premium nickel-based alloys, but they are designed for different service conditions. 🔹 Choose Monel for exceptional resistance to seawater, hydrofluoric acid, and marine environments. 🔹 Choose Inconel for outstanding strength, oxidation resistance, and performance at temperatures up to 1000°C+. Selecting the right alloy can improve equipment life, weld q

1

2 Aug 2026, 15:38 UTC271 views1 reactionsread 8 August 2026
Photo

⚠️ Every welding defect has a cause—and every cause has a solution. From Porosity and Pinholes to Lack of Fusion, Slag Inclusions, Undercut, and Cracks, understanding why defects occur is the first step toward producing high-quality, code-compliant welds. This troubleshooting guide summarizes the common welding defects, their causes, and practical methods to prevent them. 👉 Read the complete article: https://www.weld

1

2 Aug 2026, 09:26 UTC289 views1 reactionsread 8 August 2026
Photo

🛡️ CRA MATERIAL GRADES – YOUR COMPLETE CORROSION-RESISTANT ALLOY REFERENCE Selecting the right Corrosion Resistant Alloy (CRA) is critical for ensuring long-term performance in corrosive environments. This quick-reference guide brings together commonly used ASTM and AWS specifications for plates, filler metals, forgings, tubes, and pipes across the most widely used CRA material families. 📌 This infographic includes:

1

1 Aug 2026, 11:28 UTC316 views3 reactionsread 8 August 2026
Photo

📲 Download the WeldFabWorld App https://play.google.com/store/apps/details?id=com.weldfabworld.app The first version is now live! 🚀 Try it out and let us know what features you'd like in the next update. Your feedback will help us build a better app for the welding community. ⭐ Download • Review • Share • Comment #WeldFabWorld #Welding #Fabrication #Engineering #WeldingApp

❤‍🔥21

31 Jul 2026, 04:58 UTC371 views1 reactionsread 8 August 2026
Photo

📋 HOW TO REVIEW WPS, PQR & WPQ LIKE A TPI INSPECTOR | ASME SECTION IX A thorough review of WPS (Welding Procedure Specification), PQR (Procedure Qualification Record), and WPQ (Welder Performance Qualification) is essential to ensure every weld is qualified, code-compliant, and fit for service. Missing even one critical detail can lead to rejected welds, costly repairs, and project delays. 📌 This practical checklist

1

Showing the 12 most recent of 20 posts we hold for @weldfabworld. View and reaction counts are the latest single reading for each post, not a live figure, and a recent post is still accumulating both. A view count marked was rounded by Telegram before we ever saw it — t.me prints views in full below 1,000 and to three significant figures above, so ≈1,200,000 means somewhere between 1,150,000 and 1,249,999. Unmarked counts are exact. Text is reproduced from the public post preview and truncated for length.

Cite this entry

A live page changes as we take new readings, so a citation should name the measurement it is based on, not just the URL. The line below cites the subscriber count as measured 27 August 2026 — this entry's latest reading, not the date you are reading this.

“Welding Fabrication World” (@weldfabworld), 3,214 subscribers as measured 27 August 2026. Telegram Register, tgregister.com/channel/weldfabworld.

Full measurement history, CC BY 4.0. Every reading this register holds for this entry, not just the latest one, as a dated, downloadable record: CSV · JSON. Free to use with attribution to tgregister.com. Each file carries its own generation timestamp, which is the figure to cite for exactly when the data was retrieved.