Channel
@radiantenergydevices
On this record: Growth · Engagement · What this channel posts · Posts · Cite this entry
352subscribers
-2 since we began measuring on 8 August 2026
Risers and fallers across the register · movement among entries of Under 1,000.
| Telegram ID | -1001390123033 |
|---|---|
| Type | Channel |
| Username | @radiantenergydevices |
| Created | Between 1 March 2018 and 31 July 2021— estimated from Telegram’s id allocation, not measured. How this range is calculated. |
| First recorded | 8 August 2026 |
| Last confirmed live | 22 August 2026 |
| Measurements held | 4 |
| Confirmed unchanged | 1 time, most recently 22 August 2026 |
| On Telegram | t.me/radiantenergydevices |
| Measured (UTC) | Subscribers | Change |
|---|---|---|
| 22 Aug 2026, 12:48 | 352 | -1 |
| 15 Aug 2026, 14:46 | 353 | -1 |
| 8 Aug 2026, 06:46 | 354 | no change |
| 8 Aug 2026, 00:30 | 354 | first reading |
20 posts held, back to 2 June 2024 — the reader has not yet reached the start of this channel’s public history, so older posts may sit further back, unread. Read across 1 pageof Telegram’s post history, 20 posts per page.
Nothing published in the last 30 days. ERR and ER are rolling 30-day measures, so there is nothing to compute — we hold 20 posts for this entry, the most recent from 25 August 2025. An engagement rate over an empty window would be a number about nothing.
Measured directly from 4 videos with a duration reading, out of the posts we hold for this channel — not this channel’s whole posting history, only the sample this register has actually read. An exact reading to the second, taken from the post itself rather than from Telegram’s own rounded chrome, so it carries no ≈ mark.
I've properly secured down the Fan device.. usually when it gets up to speed the whole thing shakes like the building's going to come down LOL... so I've used strong hot glue to fix it all down properly... & an old broken laptop screen as a base... this also muffles the sound of the pulsing.... although not a high output charging device by any means it will run for a very long time from a 12v Ni-Cad battery...
I've noticed the timing of the device is being affected by airflow & maybe a magnetic field... so added an extra cutting disc plus the grill the fan came with... runs much better & doesn't wander...
The device is complete... runs very well.. considerably better than operating from breadboard build...
I got quite a bit done tonight with the new Fan Radiant charger... the circuits, leads & alligator clips are all in place.... still got to extend some of the stator winds before attaching them all to the circuits... clips making up for the Reed attachment then I should be able to test it out
This thing comes in useful when I need an extra pair of hands... or to take a closer look at something... I have a smaller version but this things got a very heavy metal base...
A couple of the stator leads need extending... 3 of the 4 Stator winds have been rewound... just with the same thin enamel wire due to breakages..
I've been building the main circuit board for the upcoming Fan conversion I've been working on... the circuits here have all been matched..
Over the weekend I rewound one of the stators that I couldn't get a meter reading from... all sorted now... all 4 winds have been successfully tested.. waiting for batch of resistors to arrive then I'm going to solder this thing down while making use of 4 switching circuits.. Been operating them for over 24 hours & am yet to experience a reed failure which will probably occur at some point....
Its an SG circuit I'm using here.. the Stators are separated from each other & is going to be fed into its own matching circuit... the gauge wire is extremely thin.. doesn't really possess much in the way of current carrying capacity... I'm yet to have a Reed switch fail in these systems... charging is on the low side though out of the two devices I've built this being the more potent.... I do plan on rewindin…
after separating the internal winding's I then mounted the centre piece on a compact disc with hot glue... the thin gauge of the stators breaks very easy... I fed them through the disc with hot glue before soldering onto thicker insulated wire... nothing moves so nothing can break..
This is the newer Fan I purchased.. It doesn't produce a strong enough magnetic field to switch the Reed... I know these fan's usually come with a Hall Sensor but using Reed's because I've got bag's full of them... I've already rewound two of the internal stators but I'm going to rewind them once more but with thicker gauge
This is the type of Fan... how it arrived. I didn't bother with the smaller type of Fan's the stators are just too small to work...
Showing the 12 most recent of 20 posts we hold for @radiantenergydevices. View and reaction counts are the latest single reading for each post, not a live figure, and a recent post is still accumulating both. A view count marked ≈ was rounded by Telegram before we ever saw it — t.me prints views in full below 1,000 and to three significant figures above, so ≈1,200,000 means somewhere between 1,150,000 and 1,249,999. Unmarked counts are exact. Text is reproduced from the public post preview and truncated for length.
A live page changes as we take new readings, so a citation should name the measurement it is based on, not just the URL. The line below cites the subscriber count as measured 22 August 2026 — this entry's latest reading, not the date you are reading this.
“RADIANT ENERGY DEVICES” (@radiantenergydevices), 352 subscribers as measured 22 August 2026. Telegram Register, tgregister.com/channel/radiantenergydevices.
Full measurement history, CC BY 4.0. Every reading this register holds for this entry, not just the latest one, as a dated, downloadable record: CSV · JSON. Free to use with attribution to tgregister.com. Each file carries its own generation timestamp, which is the figure to cite for exactly when the data was retrieved.