چه زمانی ER4043 انتخاب کنیم؟ ✔ قطعات ریختگی ✔ سرسیلندر ✔ رینگ ✔ بلوک موتور ✔ قطعات سری 6000 مزایا جوشکاری آسان حوضچه نرم ترک گرم کم ظاهر جوش زیبا معایب استحکام کمتر از ER5356 رنگ آن بعد از آنودایز با فلز پایه تفاوت پیدا میکند. چه زمانی ER4047 انتخاب کنیم؟ سیلیسیم این فیلر حدود ۱۲ درصد است. مزایا بهترین مقاومت در برابر ترک گرم سیالیت بسیار زیاد انقباض کم کاربرد رینگ سرسیلندر قطعات ریختگی ترکخورده معایب اس…

Channel
صنعت جوش و برش ایران
@iranwelding
On this record: Growth · Engagement · What this channel posts · Posts · Citations · Handles named that no longer answer · Cite this entry
2,140subscribers
-3 since we began measuring on 6 August 2026
Risers and fallers across the register · movement among entries of 1,000–3,162.
Register entry
| Telegram ID | -1001006999162 |
|---|---|
| Type | Channel |
| Username | @iranwelding |
| Created | Between 1 September 2015 and 31 December 2015— estimated from Telegram’s id allocation, not measured. How this range is calculated. |
| First recorded | 6 August 2026 |
| Last confirmed live | 13 August 2026 |
| Measurements held | 4 |
| Confirmed unchanged | 1 time, most recently 13 August 2026 |
| On Telegram | t.me/iranwelding |
Growth
| Measured (UTC) | Subscribers | Change |
|---|---|---|
| 13 Aug 2026, 10:35 | 2,140 | -1 |
| 10 Aug 2026, 05:36 | 2,141 | -1 |
| 7 Aug 2026, 08:11 | 2,142 | -1 |
| 6 Aug 2026, 14:34 | 2,143 | first reading |
Engagement
18 posts held, back to 3 June 2026 — the reader has not yet reached the start of this channel’s public history, so older posts may sit further back, unread. Read across 2 pagesof Telegram’s post history, 20 posts per page.
- ERR · 30 days
- 10.6%
- avg views ÷ 2,140 subscribers
- Avg views / post
- 226
- 12 posts measured
- Reaction rate
- —
- this channel exposes no reaction counts
- Posts in window
- 12
- of 18 held
ERR is average views per post over the last 30 days divided by subscribers, the definition TGStat uses, so this figure is comparable with the one you will see elsewhere. It falls structurally as a channel grows: a high ERR on a small channel and a low one on a large channel describe reach mathematics, not quality. We publish the figure and the sample it came from and pass no verdict on it.
ER is defined industry-wide as (forwards + reactions + comments) ÷ views— note the denominator is views, not subscribers. Telegram’s public web preview carries views and reactions but not forward or comment counts, so the reaction rate above is the reactions term only and is therefore a floor: the true ER for this channel is higher by an amount we have not measured and will not estimate.
| Window | Rolling 30 days · latest post in window 27 July 2026 |
|---|---|
| Posts held | 18 (3 June 2026 – 27 July 2026) |
| Views total | 2,717 |
| Reactions total | — |
| Forwards / comments | not exposed by the public surface — not measured, not estimated |
| Readings taken | 7 Aug 2026, 16:55 UTC |
Views are a single reading per post, taken at the time above. A post published in the last day or two is still accumulating views, which pulls the 30-day average down slightly. That is a property of the standard definition rather than a fault in it, so we keep the definition rather than “correcting” the number into something nobody can reproduce.
Precision. Telegram publishes view counts on its public widget in short form — 8.12K, 3.7M — so any reading at or above 1,000 reaches us rounded to three significant figures, and only counts below 1,000 are exact. Averages and rates derived from them are shown to the same precision rather than to the unit: a figure like 3,701,250 would assert digits nobody measured.
Reaction counts are published per emoji and rounded the same way, so a total below 1,000 is exact and a larger one is a sum that may carry a rounded component from each emoji above 1,000. Because it is a sum, it does not look rounded — read a large reaction total as three significant figures per contributing emoji rather than as the figure it prints.
What this channel posts
- Video runtime
- 1m 24s
- Average length
- 28s
Measured directly from 3 videos with a duration reading, out of the posts we hold for this channel — not this channel’s whole posting history, only the sample this register has actually read. An exact reading to the second, taken from the post itself rather than from Telegram’s own rounded chrome, so it carries no ≈ mark.
Recent posts
#استخدام_فوری یک شرکت معتبر و فعال در زمینه ی (ساخت تجهیزات نیروگاهی) جهت تکمیل کادر فنی خود از افراد واجد شرایط زیر دعوت به همکاری می نماید . 🔴جوشکار 🔹️آرگون co2🔹️ 🔹️برق حداکثر سن:42 سال 🔴مونتاژکار 🔹️مسلط به نقشه خوانی 🔹️دارای سابقه ی معتبر در مونتاژ تجهیزات صنعتی دقیق (نیروگاهی) 🔹️توانایی ساخت فیکسچرهای صنعتی 👤حداکثر سن : 42 🔴نیروی فنی 🔹️کار با ابزار مینی سنگ ، دریل 🔹️توانایی کار با ابزار دقیق ( کولیس ، میکرومتر…
درود و وقت بخیر یک شرکت معتبر در شهرک صنعتی بزرگ ، نیروی کار در ضمیمه فنی نیازمند تراشکار منوال، دریل کار ، اپراتور دستگاه تراش cnc و متریال من ،جوشکار می باشد جهت ارسال رزومه در ایتا و یا تلگرام و یا با شماره 09133014682 تماس حاصل فرمایید. @Iranwelding
نیاز به جوشکار در اصفهان @iranwelding
نیاز به جوشکار در تبریز @iranwelding
برای جوشکاری یا برشکاری روی مخازن حاوی یا قبلاً حاوی مواد قابل اشتعال، رعایت دستورالعملهای ایمنی بسیار حیاتی است، زیرا حتی مقدار کمی بخار یا گاز باقیمانده میتواند باعث انفجار شود. مهمترین الزامات عبارتاند از: مجوز کار گرم (Hot Work Permit) قبل از شروع کار صادر شود. مخزن کاملاً از سرویس خارج و تمام ورودی و خروجیها ایزوله (Blind یا Disconnect) شوند. تخلیه کامل مواد از داخل مخزن انجام شود. شستوشوی کامل با آب…
برشکاری و جوشکاری تعمیراتی بر روی مخازن ذخیره مواد قابل اشتعال نیازمند رعایت دستورالعمل های خاص است که عدم رعایت آن می تواند صدمات جبران ناپذیری وارد کند. @IRANWELDING
عملیات حرارتی آلیاژهای آلومینیوم همه آلیاژهای آلومینیوم قابلیت عملیات حرارتی ندارند. به طور کلی: قابل عملیات حرارتی: سری 2000 سری 6000 سری 7000 بعضی آلیاژهای ریختگی مانند A356 و A357 غیرقابل عملیات حرارتی: سری 1000 سری 3000 سری 5000 در آلیاژهای غیرقابل عملیات حرارتی، استحکام با کار سرد (Cold Working) افزایش مییابد، نه با عملیات حرارتی. حالت O (Annealed) O یعنی بازپخت کامل. روش انجام قطعه تا دمای مشخص گرم میشو…
رفتار آلیاژهای آلومینیوم در هنگام جوشکاری وقتی آلومینیوم جوشکاری میشود، فقط فلز ذوب نمیشود؛ ریزساختار (Microstructure) نیز تغییر میکند. این تغییرات تعیین میکنند که استحکام، سختی و مقاومت قطعه پس از جوشکاری چگونه خواهد بود. نواحی مختلف یک اتصال جوشی بعد از جوشکاری، اتصال به سه ناحیه اصلی تقسیم میشود: ۱_ فلز جوش (Weld Metal) ناحیهای که کاملاً ذوب شده و از مخلوط فلز پایه و فیلر تشکیل شده است. ویژگیها: ریزسا…
خلاصه عناصر آلیاژی و تاثیرات آنها در آلومینیوم : عنصر مهمترین اثر Si سیالیت، کاهش ترک گرم، ریختهگری بهتر Mg استحکام، عملیات حرارتی، Mg₂Si Cu استحکام زیاد، مقاومت حرارتی Zn استحکام بسیار بالا Mn افزایش استحکام، ریزدانه کردن Cr جلوگیری از رشد دانه Ti جوانهزایی و ریزدانه کردن B کمک به جوانهزایی Ni مقاومت در دمای بالا Zr مقاومت خستگی و جلوگیری از رشد دان…
مقایسه آلومینیوم و تیتانیوم: این مقایسه کمی به نوع آلیاژ بستگی دارد، اما بهطور کلی تیتانیوم از نظر استحکام و مقاومت حرارتی برتری دارد. ویژگی آلومینیوم تیتانیوم چگالی (وزن مخصوص) Al حدود 2.7 g/cm³ Ti حدود 4.5 g/cm³ نقطه ذوب Al حدود 660°C Ti حدود 1668°C استحکام کششی آلیاژهای معمولی Al حدود 200 تا 600 MPa Ti حدود 700 تا 1200 MPa (در بعضی آلیاژها بیشتر) مقاومت به خوردگی Al خوب Ti بسیار عالی انتقال حرارت Al بسیار خو…
خلاصهای از سریهای اصلی آلیاژهای آلومینیوم، عنصر اصلی آلیاژی، خواص، کاربرد و فیلر مناسب جوشکاری (عمدتاً TIG/MIG) است: سری آلومینیوم عنصر اصلی آلیاژی خواص کلی کاربردها فیلرهای رایج سری1000 آلومینیوم خالص (بالای 99٪) رسانایی عالی، شکلپذیری زیاد، استحکام کم سیم برق، ورقهای خاص، مبدل حرارتی ER1100 سری2000 مس (Cu) استحکام بالا، ماشینکاری خوب، مقاومت خوردگی کمتر هواپیما، قطعات تحت بار ER2319، ER4043 (بسته به آلیاژ…
Showing the 12 most recent of 18 posts we hold for @iranwelding. View and reaction counts are the latest single reading for each post, not a live figure, and a recent post is still accumulating both. A view count marked ≈ was rounded by Telegram before we ever saw it — t.me prints views in full below 1,000 and to three significant figures above, so ≈1,200,000 means somewhere between 1,150,000 and 1,249,999. Unmarked counts are exact. Text is reproduced from the public post preview and truncated for length.
Citation-graph rank
Citation-graph rank — 1,246,269 of 1,340,412entries in the measured graph. A weighted position computed from the forward and mention edges below — republished posts weigh more than named mentions — and recomputed periodically, over the whole graph. Published only as this ordinal position, never as a score: a position is a fact, and a score printed beside one channel’s name would read as a verdict this register does not make. The two counts beneath stay separate for the same reason mentions are never summed with forwards anywhere else on this page — a named-by count costs nothing to manufacture. The top 100 by this measure, or how it is computed.
Mentions
Named by 1 registered channel — every channel on the register whose own posts have named this one, by its current username or any other username it currently holds, merged from two separately captured readings of the same fact so a namer caught by only one of them is not missed and a namer both caught is not counted twice. A username this channel has since dropped is not matched — that handle may belong to someone else now, and crediting today’s namer to yesterday’s owner would misattribute it.
Named by
Channels on the register whose posts name this channel's handle.
A mention is a weaker signal than a forward and is counted separately for that reason — naming a channel is not republishing it, and a handle in a post body is easy to place deliberately. The post counts beside each row below are distinct posts in which the handle appeared, from posts we have read on both sides — the “Named by N registered channels” figure above is a different count, of distinct NAMING CHANNELS rather than posts, and is not the sum of the rows under it.
Handles this channel named that no longer answer
- Dead references
- 1
- handles named in this channel’s posts, vacant today
- Evidenced gone
- 0
- we ourselves saw one of these resolve, at some point
- Never seen alive
- 1
- vacant every time we have ever looked
@iranwelding named 1 handle that resolve to nothing today. That is a fact about the reference, not necessarily a fact about the handle’s history — see the two groups below.
Most of these may never have existed as a live channel at all.A handle a channel names can be a typo, an aspirational name nobody registered, or a channel that was already gone before this one ever mentioned it. Unless a row below is marked evidenced, all we know is that it references a handle that is not a live channel today — not that anything “died”. How this is measured.
Never seen alive
References a handle that is not a live channel — we have no record it ever was one.
named in 1 post, 8 August 2026 – 8 August 2026
Cite this entry
A live page changes as we take new readings, so a citation should name the measurement it is based on, not just the URL. The line below cites the subscriber count as measured 13 August 2026 — this entry's latest reading, not the date you are reading this.
“صنعت جوش و برش ایران” (@iranwelding), 2,140 subscribers as measured 13 August 2026. Telegram Register, tgregister.com/channel/iranwelding.
Full measurement history, CC BY 4.0. Every reading this register holds for this entry, not just the latest one, as a dated, downloadable record: CSV · JSON. Free to use with attribution to tgregister.com. Each file carries its own generation timestamp, which is the figure to cite for exactly when the data was retrieved.